Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
162
Section 3 Description of Field Strength Menu
1 Frequency menu ([PScan] mode)
· [Freq]: Press [Freq]→ [Freq] and set the frequency with the number
keys on the front panel. Select [GHz], [MHz], [kHz] or [Hz] in the
frequency unit menu, or change the point frequency with the [↑] or [↓] key
or knob.
· [Special note]: The point frequency setting range is 1MHz to
44.1GHz.
· [Freq step]: Press [Freq]→[Freq Step Auto Man] and set the point
frequency step with the [↑] or [↓] key or knob. The frequency step should
be set as 1MHz in the auto mode.
· [Freq Track Off On]: Press [Freq]→[Freq Track Off On] to enable or
disable frequency tracking. When the frequency tracking is enabled, the
instrument is able to automatically track the frequency of the peak point,
and the tracked frequency will be displayed on the current frequency
display zone of the screen.
· [Special note]: The peak point in frequency tracking refers to the
peak point of the amplitude signal searched within the current
bandwidth range.