Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
16
The AC-DC adapter must not be connected to the test instrument in order to prevent the instrument from
overheating when transported and carried with a knapsack. The voltage input range of the AC-DC adapter is
relatively wide, so you must ensure that the power voltage is within the range specified in Table 2-1 during
operation.
The working voltage and frequency ranges are subject to the parameters provided on the nameplate of the power adapter.
Table 2-1 Power Supply Requirements
Power supply parameter
Applicable range
Input voltage
Rated input currency
Work frequency
Output Voltage/Current
100V-240VAC
1.7A
50/60Hz
15.0V/4.0A
 DC power supply
Voltage: 15V
Current: 3A (min.)
 Power supply with built-in battery
S3302 series instruments can be powered up with the rechargeable lithium ion battery. The battery will discharge if
it is not used for a long time. Therefore, the battery must be recharged before use. Refer to Section 3 for battery
operation details. Basic parameters of accompanying battery are as follows:
 Nominal voltage: 10.8V
 Nominal capacity: 7800mAh
The rechargeable battery must not be exposed to fire or high-temperature environments (above 70°C), or placed in fresh water or salt water, or made wet.
It must be kept away from children.
The rechargeable battery is reusable and should be stored in proper container to avoid short circuit. Heavy metals such as nickel and chromium in the
battery can pollute natural environment. Waste battery shall not be discarded but shall be put into a special battery recycle box.