Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
159
5) Press [Swp/Ant]→ [Recall Antenna], and select the antenna factor file.
6) Press [Swp/Ant]→ [Dwell Time +∞ Man], and set the dwell time.
7) Press [Swp/Ant]→ [Dwell Time Off On] to enable or disable the dwell time.
8) Press [Marker]→ [Marker Off On] to enable or disable the marker.
9) Press [Peak] to directly set the marker at the maximum point.
The MScan mode must be changed with the list.
The schematic diagram of MScan mode is shown in the figure below (example).
Fig. 9-3 Schematic Diagram of MScan Mode