Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
153
3 Frequency Scanner menu
· [Start frequency]: Press [Sweep]→ [Freq Scanner]→ [Start Freq], and
set the center frequency of the starting channel.
· [Step Freq]: Press [Sweep]→ [Freq Scanner]→ [Step Freq], and set the
frequency step between channels.
· [Bandwidth]: Press [Sweep]→ [Freq Scanner]→ [Bandwidth], and set
the bandwidth of the measured channel.
· [Number of Channels]: Press [Sweep]→[Freq Scanner]→[Number of
Channels], and set the number of measured channels. At most 20
channels can be measured.
4 List Scanner menu
·[Edit list]: Press [Sweep]→ [List Scanner]→ [Edit List], and the
corresponding [Edit List] menu will pop up. Refer to [Edit List] menu for
details.
· [Number of Channels]: Press [Sweep]→ [List Scanner]→ [Number of
Channels], and set the number of measured channels. At most 20
channels can be measured.