Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
146
measurement.
10 Measurement menu
· [Demo Type AM FM PM]: Press [Measure]→ [Demod Type AM
FM PM] and select the type of the modulation signal.
· [RF Spectrum]: Press [Measure]→ [RF Spectrum] to display the
RF spectrum only.
· [Audio Spectrum]: Press [Measure]→ [Audio Spectrum] to
display the audio spectrum only.
· [Audio Waveform]: Press [Measure]→ [Audio Waveform] to
display the audio waveform only.
· [Summary]: Press [Measure]→[Summary] to display the RF
spectrum, audio spectrum and audio waveform at the same time.
· [Sweep Cont
Single]: Press [Measure]→[Sweep Cont Single] to
enable continuous or single sweeping.
· [Sweep Once]: Press [Measure]→[Sweep Once] to trigger
sweeping once. Sweeping can only be performed once again in the
single mode.
11 File menu
Refer to the file menu description in the spectrum analyzer mode.