Tus neeg siv phau ntawv

Tel: [phone] Email: [e-mail]
www.salukitec.com
142
5 Marker menu
· [Marker 1 2 3 4 5 6]: Press [Marker]→ [Marker 1 2 3 4 5 6] to
change various markers. The selected marker will be underlined.
· [Normal mode]: Press [Marker]→[Normal] to enable the normal
mode of the current marker.
· [Delta mode]: Press [Marker]→[Delta] to enable the delta mode
of the current marker. In this case, the frequency difference and
amplitude difference (time difference under zero span) between the
differential marker and reference marker will be displayed. The
amplitude will be displayed in dB.
· [Select Trace]: Press [Marker]→ [Select Trace], and soft menus
related to the trace will pop up, including [RF Spectrum],
[Audio Spectrum] and [Audio Waveform]. Refer to the [Select
Trace] menu for details.
· [Off]: Press [Marker]→ [Off] to disable the current active marker.
· [All Off]: Press [Marker]→ [All Off] to disable all active markers.
· [Select Trace]: Press [Marker]→ [Select Trace].
· [RF spectrum]: Press [Marker]→ [Select Trace]→ [RF
Spectrum] to select the trace in the RF spectrum. In this case, the
marker can only be operated on this trace.
·[Audio Spectrum]: Press [Marker]→ [Select Trace]→ [Audio
Spectrum], and select the trace in the audio spectrum. In this case,
the marker can only be operated on this trace.
· [Audio Waveform]: Press [Marker]→ [Select Trace]→ [Audio
Waveform], and select the trace in the audio waveform. In this case,
the marker can only be operated on this trace.