Use and Care Manual

Installing the Filter:
HoldtheFilterbythetopedgeandinserttheFilterHookonthebottom
edge of the spout on the inside of the kettle. Press the Tab against the
top edge of the spout until you hear a click.
IMPORTANT: Do not remove or install the Filter when the Kettle is
hot.
CARE AND CLEANING
1. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
2. Unplug Kettle from wall outlet. Empty the Kettle and allow it to cool
before cleaning.
1. Exterior
- Use a soft, damp cloth to clean the exterior.
- DO NOT use abrasive cleaners. Dry exterior thoroughly before use.
- DO NOT immerse kettle or power base in water or other liquid.
2. Descaling
Under normal use, scale build-up will form on the inside of the Kettle
and will coat the stainless steel plate. Scale, which has accumulated
inside the Kettle must be removed.
1. Boilequalpartsofwhitevinegarandwater.(500ml/2cupsofeach
is recommended)
2. Oncethewaterhasboiled,allowthemixturetostandseveralhoursor
overnight.
3. EmptyoutthemixtureandlltheKettletotheMAXlevelwithfresh
water.
4. Bring water to a boil and discard.
5. Forheavierscalebuild-up,usepurevinegar,boil,thenletstand
overnight.
6. EmptyoutvinegarandlltheKettletotheMAXlevelwithfreshwater.
7. Bring water to a boil and discard.
8. Fortheheaviestscalebuild-upuseascale/limeremoverandfollow
 themanufacturer’sinstructions.
NOTE:
1. Scale build-up can be reduced by pouring out water after Kettle use
 thenrellingtheKettlewhenrequired.
2. The descaling process should be repeated periodically.
5