Use and Care Manual

DESCRIPTION OF PARTS

1. Base

2. Drip Tray

3. Control panel / Element

4. Indicator Light

5. Temperature Control Knob

6. Grill Plate

7.WaterRellHole

8. Safety Switch (under control panel)

9. Activation Button

BEFORE FIRST USE

1. Read all instructions carefully and keep them for future reference.

2. Remove all packaging, labels, etc.

3. Wipe the Control Panel/Element with a damp cloth. Ensure that water

does not enter the Control Panel during cleaning. Dry with a soft cloth.

IMPORTANT: NEVER IMMERSE THE CONTROL PANEL/ ELEMENT

OR POWER CORD IN WATER OR ANY OTHER LIQUID.

4. Wash the Grill Plate, Base and Drip Tray in warm soapy water to

remove any residue from the manufacturing process. Dry all parts

thoroughly with a soft cloth.

NOTE: Never use any metal objects, scouring pads or harsh abrasive

cleansers to clean any part of the Grill.

NOTE: The Grill Plate and Drip Tray are dishwasher safe.

5. BeforeusingtheGrillPlateforthersttime,itmust‘seasoned’by

brushing with a small amount of oil, butter or margarine. Allow it to

remain on the Grill Plate for a few minutes then wipe off excess with a

paper towel.

6. Follow the instructions in the Assembly section to assemble the Grill.

7. OncetheBaseandDripTrayareassembled,lltheDripTraytothe

 MAXlinewithwater.ThenassembleControlPanel/ElementandGrill

Plate.

8. PlacetheGrillonaatsurface,closetoa120voltwalloutletinawell

ventilated area. Place the Grill a minimum of 30 cm (12”) away from

 wallsandanyammablesurfaces.

9. Turn the Temperature Control to the highest setting (#5). Leave on

for 5 minutes to burn off any manufacturing oils and the oil from the

seasoned Grill Plate.

NOTE: The First Time Use process may create a little smoke.

Activation Button