Installation Guide

INSTALLATION GUIDE AELEMENT ANSI LOCK
220511-ED. 14/09/2016
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2016 SALTO Systems S.L.
2/2
Installation guide AELEMENT
ANSI Lock
CUT
*
*
CORTE
Metal door
Puerta metalica
Porte metallique
Wood door
Puerta madera
Porte en bois
REMOVE
QUITAR
RETIRER
Screw driver
PZ2
Aligned
OUTSIDE & INSIDE
2
Alinear
EXTERIOR - INTERIOR
=
=
b
a
Screw driver
Torx T10 TAMPER
AT THIS POINT DO NOT
CLOSE THE DOOR.
PROGRAM THE LOCK FIRST
Follow user manual.
Eng
NO CIERRE LA PUERTA.
PROGRAMAR ANTES LA
CERRADURA
NE PAS FERMEZ LA PORTE
DE PROGRAMMER LA
SERRURE
E
F
LR03
+
+
+
21
3
INSIDE
INTERIOR
INTERIEUR
The groove must be on the same side than the grub screw.
La ranura en el lado del prisionero.
La rainure doit être du côté de la vis.
4 5
OUTSIDE
EXTERIOR
EXTÉRIEUR
INSIDE
INTERIOR
INTÉRIEUR
6
1
6 7
8
READER CABLE
CABLE LECTOR
LOCK CABLE
CABLE CERRADURA
9
10
11
Aligner
EXTÉRIEUR - INTÉRIEUR
Fasten with screw to keep it aligned
Fijar tornillo para mantener el alineamiento
Fixant le vis pour maintenir l'alignement
WIRELESS CABLE *
*Only available in
AE9W model