Operation Manual

USING THE PROGRAM FUNCTIONS
Your SALTER induction hob has 6 built-in program functions, as described in the table below.
These programs are designed to make the everyday cooking quicker and easier at the touch
of a button.
Select the required program by pressing the SYMBOL button until the LED lights up above the SYMBOL.
NOTE: To override the programmed power setting at any time; simply use the / buttons
to raise or lower the power as required. So, for example, if the heat is too high, press to
lower the power.
PROGRAM
FUNCTION
SYMBOL POWER SETTING SUGGESTED USE AVAILABLE
TIMER SETTINGS
MANUAL 1200W default setting.
Touch and to adjust
output levels. 11 Power
levels from 200W-2200W.
General Use 1 min to 24 hours
BOIL 1600W default setting.
Touch and to adjust
output levels. 11 Power
levels from 200W-2200W.
Bringing water to the boil
quickly and eciently for
rice, pasta etc
1 min to 24 hours
FRY 160
o
C default setting.
Touch and to adjust
output levels. 10 Power
levels from 60
o
C-240
o
C.
Rapid high heat for stir
fries, searing meat etc
1 min to 24 hours
SOUP Semi-Automatic control
1000W (for the first 2 mins)
1800W-400W (for approx. 2 hrs)
200W (for remaining time)
Homemade soups and
casseroles etc
4 hours
STEAM Semi-Automatic control
1000W (for the first 2 mins)
1800W-1200W (for 30 mins)
Steaming vegetables etc 30 min
KEEP WARM Semi-Automatic control
800W inititally
200W (for remaining time)
Keep food warm after
cooking until ready to
serve
30 min
TIMER
Once cooking is underway, the timer can be set as follows:
• Press the TIMER button.
• The Hours flash. Adjust the hours setting using the +/- buttons
• Press the TIMER button.
• The Minutes flash. Adjust the minutes setting using the +/- buttons
• Press the TIMER button to start the timer
• The timer display will start to flash and then alternate with the power/temp display
• When the time is up, the unit will beep and the hob will automatically switch o.