Instruction manual

UPLOADING RESULTS TO YOUR COMPUTER

Step 1: Transfer Results To USB Flash Drive

1. Check scale is in clock mode.

2. Insert USB flash drive into slot on edge of scale.

3. Press USB button.

4. Wait while data is transferred.

5. When display reverts to clock mode transfer is complete (results are deleted from scale).

6. Remove USB stick.

Note: During the transfer all results for all users are transferred to the USB flash drive and the scale

memory is completely cleared. To avoid accidentally overwriting the data on the USB flash drive we

recommend that the results are transferred to your computer immediately.

Step 2: Open The MiBody PC Software

If using the software for the first time:

1. Double click on the Salter9142 icon on your computer desktop.

Note: On Windows 7 operating systems when opening the software for the first time right click the

desktop icon and select Run as administrator. After this, the software can be opened by simply

double clicking on the desktop icon.

2. The Salter MiBody window opens.

3. Select your user number from the drop down list. This must match the scale user number.

4. Enter your user name.

5. Enter your password and click OK

6. Confirm your password and click OK

7. A message “No Data for the specified criteria” will appear, click OK

If you are a returning user:

1. Double click on the Salter9142 icon on your computer desktop.

2. The Salter MiBody window opens.

3. Select your user number from the drop down list.

4. Enter your password and click OK

Step 3: Transfer Results To PC

1. Insert the USB flash drive into your computer USB slot.

2. A window will open showing the message “Data Found, do you want to import now?”.

To import click OK.

3. The data will be imported into the PC software and deleted from the USB stick.

4. Your uploaded data will be displayed in a table.

Note: All results for all users are transferred to the PC

Note: Transfer all results to your computer before transferring new results to the USB flash drive.

If you transfer new results to the USB flash drive any previous results on the USB flash drive will be

overwritten.

Note: Close the Salter MiBody software before attempting to remove the USB Flash Drive.