Instructions / Assembly
Table Of Contents
15" Wide Designer Locker Options - 20000 Series
Installation Instructions
SALSBURY INDUSTRIES
18300 Central Avenue, Carson, CA 90746-4008
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com engineering
@lockers.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2020 Salsbury Industries. All rights reserved. (Revision 06, 08/17/2016) Page 6 of 7
Front Filler Fascia
Assemble the front filler fascia by placing color laminated piece in front of base piece, then connect the two pieces together using screws by drilling
at approximately a 75 degree downward angle. #8 x 1-1/4” long screws are provided for the installation.
A
lign front of fascia with front edge of compartment (not the front edge of the door). Install the front filler fascia by fastening it to the lockers by
installing screws from inside the lockers into the base of the front filler fascia. #8 x 1-1/4” long screws are provided for the installation.