Operation Manual

4 4
RS-232C Communication Protocol
External adjustment
Commands
14. Pip Source : u
▶ To Select Pip Source [Not available]
(only adjustable when pip mode is activated.)
* Transmission
{u}{ }{SET ID}{ }{Data}{Cr}
Data 0 : TV
Data 1 : Scart1
Data 2 : Scart2
Data 3 : Composite
Data 4 : S-Video
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : TV
Data 1 : Scart1
Data 2 : Scart2
Data 3 : Composite
Data 4 : S-Video
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
15. Pip Location : n
▶ To Select Pip Position
(only adjustable when pip mode is activated.)
* Transmission
{n}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
11. Sharpness : h
▶ To adjust Sharpness
* Transmission
{h}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
12. Information : f
▶ Information on/off
* Transmission
{f}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
13. Pip On : o
▶ Pip on/off
* Transmission
{o}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off