Operation Manual

7
You can select input source by using source menu. Press [SOURCE] button to show the
menu as follows:
The current source item is highlighted. Through press [ ] button on the remote control
or [ CH+/CH- ] key on the front of LCD TV to select your desire, Press [ ] button,
[VOL+/VOL-] key or [OK] button to confirm your choice .
SELECTING SOURCE OPERATION
INDICATOR
After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary
cables include power have connected,
Press the [STANDBY] button on the remote control to make the unit switch to power-on
mode - you will see the LED indicator turn blue. Now you can enjoy the many features of
your new TV.
The next you should do is:
STANDBY
POWER
EXIT
STANDBY
SWITCHING ON