User's Manual

4 Initiate SMC from PC

 Connect to the SMC - Monitoring Camera

 Connect via the wired network

1. Connect the RJ45 port of SMC to PC / NB via a

network wire.

2. Connect the USB AC Adaptor with USB cable to

the mini USB Port. (This mini USB port is for

power supply only.)

3. The SMC launch automatic when the USB power

supplied.

4. The system will need about 15 seconds to initiate

after the LED of RJ45 connecter blinking.

5. Press the Setup button. The Status LED blinking

slowly with RED.

6. The status LED stop blinking and illuminate with

RED when link with the network.