Owner's Manual

Salamander Accent Lighting Systems [500-337 v7.16] page 4 of 4
5. Controller settings for the SD/LS2/W
• POWER-ON/OFF
• SLEEPTIMER-Turnssystemoinincrements
of30minutes.
 Pushoncefor30minutes,pushtwicefor1houretc...
 uptoamaximumof6hours.Thesystemwillconrm
 settingswithaquickashforeach30minuteincrement.
•BREATH-Slowfadeinandoutoflight.Pushto
 start/stop.
• BRIGHTNESS-Pressplusorminusicontoselect
desiredbrightness.20Brightnesslevels.Pressand
hold for rapid change.
•FIRE&ICE-AdjustableWhiteColorTemperature.
Fromcoolwhitetowarmwhite(6500K-3000K)
•MEMORY-3lightingsettingscanbesaved.
PROGRAMMING MEMORY:
1.Choosefavoritesetting,thenpresstheMemorybutton(M)
2.Whenlightsashtwice,SELECTbuttons1,2or3tosave
3.CheckMemorybuttontobesuresettingwassaved.
4.Ifnotsavedrepeatprocess.
TO RESTORE MEMORY TO FACTORY SETTINGS:
Pressthe“Power”buttontoturno.Theninsequentialorderpress
buttons“3”,“2”,“Sleep”.Thelightbarswillashonceandfactory
settingswillberestored.
MEMORY 1- 4400K
MEMORY 2- 3000K
MEMORY 3- Breathwith6500K
www.salamanderdesigns.com
800.535.5659