Owner's Manual

ManualsBrandsSalamander Designs ManualsFurnitureLighting System II

Table Of Contents

User Manual
- Parts
- Installation

Salamander Accent Lighting Systems [500-337 v7.16] page 1 of 4

SD/LS2/W USER MANUAL

ACCENT LIGHTING SYSTEM

Feature:

• AdjustableColorTemperature:

CoolWhitetoWarmWhite

(6500K - 3000K)

•Includes2-15’’(380mm)lightbars

Expandableto6LightBars

• Fulldimmingandbrightnesscontrol

• BreathModeandSleepTimer

• Infraredremotecontrol

• Upto3memorysettings

• Voltage:Input110/240V

Output:DC12V.Interchangeable

internationalplugheads

HOME THEATER EXPERIENCE TIPS

•Youcanadjustthewidthoftheilluminatedareaby

 rotatingtheLEDlightbar.RotatingtheLEDs

 outwardswillbroadenthelightedareawhilerotating 

 theLEDsinwardwillreducethelightedarea.

• BacklightingandhighlightsofTV’scanreduceeye

 strainwhilewatchingTVinlowambientlightconditions.

• OptionalexpansionLEDlightbarsareavailablein

 lengthsof15’’(380mm)or24”(610mm).Thesewill

 allowlightingofotherareassuchaslargeTV’s,

 speakers,bookcases,etc.

WARRANTY

Salamander Electronic Accessories Warranty Limitations

Salamander provides a two (2) year Limited Warranty on Electronic Accessories.

This warranty covers the repair or replacement, at Salamander’s option,of any

product defective in materials or craftsmanship.

For full Warranty see www.salamanderdesigns.com/

customerservice/warranty

www.salamanderdesigns.com|800.535.5659

Summary of content (4 pages)

PAGE 1
ACCENT LIGHTING SYSTEM SD/LS2/W USER MANUAL Feature: HOME THEATER EXPERIENCE TIPS • Adjustable Color Temperature: Cool White to Warm White (6500K - 3000K) • You can adjust the width of the illuminated area by • Includes 2 - 15’’(380mm) light bars Expandable to 6 Light Bars • Full dimming and brightness control • Breath Mode and Sleep Timer • Infrared remote control • Up to 3 memory settings • Voltage: Input 110/240V Output: DC12V.
PAGE 2
PARTS TYPE C TYPE I TYPE G TYPE A Power Supply Mounting Clips & Fasteners Interchangeable Plug Heads Digital Control Hub IR Remote IR Receiver WARNING DO NOT USE SCREWS TO FASTEN TO ELECTRONIC DEVICES OR SENSITIVE SURFACES. NEVER APPLY PRESSURE TO THE CLEAR TUBE. LIGHTS WILL GET DAMAGED. DO NOT PLUG INTO POWER SUPPLY UNTIL LIGHTING IS ALL CONNECTED. (2x) 15” Lighting Bars Salamander Accent Lighting Systems [500-337 v7.
PAGE 3
INSTALLATION 1. Select appropriate plug head and attach it to the power supply. (NOTE: There are FOUR different international heads included) 2. Connect IR Receiver and Power Supply to Digital Control Hub. A. B. C. Mount Digital Control Hub in suitable location. Connect Power Supply to Digital Control Hub Connect IR Receiver to Digital Control Hub (NOTE: It is important to place the IR Receiver in a visible location for the Remote to interact with the IR Receiver) 3.
PAGE 4
5. Controller settings for the SD/LS2/W • POWER - ON/OFF • SLEEP TIMER- Turns system off in increments of 30 minutes. Push once for 30 minutes, push twice for 1 hour etc... up to a maximum of 6 hours. The system will confirm settings with a quick flash for each 30 minute increment. • BREATH- Slow fade in and out of light. Push to start/stop. • BRIGHTNESS- Press plus or minus icon to select desired brightness. 20 Brightness levels. Press and hold for rapid change.