MSDS
August 22, 2008 US Coldpatch Page 1 of 5
MATERIAL SAFETY DATA SHEET
Date Prepared: September 25, 2009
1. PRODUCT/COMPANY IDENTIFICATION
Product Name:
Sakrete US Cold Patch
US Cold Patch
Manufactured by:
YK Products, LLC
Manufactured for & distributed by:
The SAKRETE Companies
8201 Arrowridge Blvd.
Charlotte, NC 28273
Emergency Telephone:
425-244-5000
Telephone Number for Information:
425-244-5000
2. EMERGENCY AND FIRST AID
EYES:
If contact is made with the eye, flush with copious quantities of fresh water
(i.e., 15 minutes). Remove contact lenses if worn. Seek medical attention if
irritation persists.
SKIN:
Wash skin thoroughly with soap and water. Do not use solvents, thinners,
abrasives, acids or caustics to remove the material from skin. Asphalt can
be removed with vegetable oil or mineral oil if soap and water is not
effective.
INHALATION:
This material is not considered to be an inhalation hazard. However, if
symptoms appear that are believed to be associated with odors (i.e. , fumes
or vapors) associated with this product, remove the patient from the
immediate area to a location with “fresh air”
INGESTION:
Accidental consumption of this product should not result in systemic
toxicity. Drink milk and or water and consume a small amount of soft
foods. The product should eliminate itself from the body.
3. COMPOSITION INFORMATION
DESCRIPTION:
Product is virtually odorless, black in color and consists of a heavy black sand type mixture
blended with small stones and gravel.
4.COMPOSITION INGREDIENTS
COMPONENT Typical
Content
Chemical Name
(common)
OSHA PEL
(8-Hour TWA)
ACGIH TLV-TWA
(1995-1996)
(1) NIOSH REL
(8-Hour TWA)
Stone/Aggregate
Sand
40-50%
35-45%
Aggregate
Silicates
--
10 mg/M
3
--
(2) 0.05 mg/M
3
Not Applicable
(3) 0.05mg/M
3





