SDS

Sakrete Concrete Bonder & Fortifier
Safety Data Sheet
according to
the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012.
Unsuitable extinguishing media
:
None known.
5.2. Special hazards arising from the substance or mixture
Fire hazard
:
Products of combustion may include, and are not limited to: oxides of carbon.
5.3. Advice for firefighters
Protection during firefighting
:
Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory
protection (SCBA).
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Protective equipment
:
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.1.2. For emergency responders
No additional information available
6.2. Methods and material for containment and cleaning up
For containment
:
Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable
container. Do not flush to sewer or allow to enter waterways.
Use appropriate Personal
Protective Equipment (PPE).
Methods for cleaning up
:
Scoop up material and place in a disposal container.
6.3. Reference to other sections
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Avoid contact with skin and eyes. Avoid breathing vapour or mist. Do not swallow. Handle and
open container with care. When using do not eat, drink or smoke.
Hygiene measures
:
Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Keep out of the reach of children. Keep container tightly closed.
7.3. Specific end use(s)
Not available.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls
:
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended ex
posure limits.
Hand protection
:
Wear suitable gloves.
Eye protection
:
Safety glasses or goggles are recommended when using product.
Skin and body protection
:
Wear suitable protective clothing.
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory equipment.
Environmental exposure controls
:
Maintain levels below Community environmental protection thresholds.
Other information
:
Do not eat, smoke or drink where material is handled, processed or stored. Wash hands carefully
before eating or smoking. Handle according to established industrial hygiene and safety
practices.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Liquid.
Colour
:
No data available.
Odour
:
No data available.
Odour threshold
:
No data available.
pH
:
No data available.
Relative evaporation rate (butylacetate=1)
:
No data available.
Melting point
:
No data available.
Freezing point
:
No data available.
Boiling point
:
No data available.
01/20/2014 EN (English) 2/5