SDS

MATERIAL SAFETY DATA SHEET
Sakrete Polyurethane Construction Adhesive
01/31/2018
5 / 8
Coefficient of Water/Oil Distribution:
Not available.
Auto-ignition Temperature:
> 200 °C (> 392 °F)
Percent Volatile, wt. %:
Not available.
VOC content, wt. g/L:
34 g/L [Calculated SCAQMD Rule 443.1]
Section 10: STABILITY AND REACTIVITY
Stability: Stable under normal storage conditions.
Conditions of Reactivity: Heat. Incompatible materials.
Incompatible Materials: Alcohols. Amines. Water.
Hazardous Decomposition Products: May include, and are not limited to: oxides of carbon,
oxides of nitrogen, hydrogen cyanide.
Possibility of Hazardous Reactions: No dangerous reaction known under conditions of normal use.
Section 11: TOXICOLOGY INFORMATION
EFFECTS OF ACUTE EXPOSURE
Component Analysis
Ingredient
LD
50
(oral)
LC
50
Titanium dioxide
> 10000 mg/kg, rat
Not available.
Calcium oxide
> 2000 mg/kg, rat
Not available.
Xylene
4300 mg/kg, rat
5000 ppm 4hr, rat
Ethylbenzene
3500 mg/kg, rat
17.2 mg/L 4hr, rat
4,4'-Diphenylmethane diisocyanate
9200 mg/kg, rat
380 mg/m
3
4hr, rat
Eye:
Irritating to eyes. May cause burns. Symptoms may include discomfort or pain,
excess blinking and tear production, with possible redness and swelling.
Skin:
Irritating to skin. May cause burns. Symptoms may include redness, edema,
drying, defatting and cracking of the skin.
Ingestion:
May cause burns. May be harmful if swallowed. May cause stomach distress,
nausea or vomiting.
Inhalation:
May cause respiratory tract irritation. May cause respiratory sensitization.
Cough, discomfort, difficulty breathing, or shortness of breath.
EFFECTS OF CHRONIC EXPOSURE
Target Organs: Not available.
Chronic Effects: Not hazardous by WHMIS criteria.
Carcinogenicity: Hazardous by WHMIS criteria.
Ingredient
Chemical Listed as Carcinogen or
Potential Carcinogen *
Titanium dioxide
G-A4, I-2B
Calcium oxide
Not listed.
Xylene
G-A4, I-3
Ethylbenzene
G-A3, I-2B
4,4'-Diphenylmethane diisocyanate
I-3