SDS

MATERIAL SAFETY DATA SHEET
Sakrete Polyurethane Construction Adhesive
01/31/2018
4 / 8
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient
ACGIH-TLV
Titanium dioxide
10 mg/m³
Calcium oxide
2 mg/m
3
Xylene
100 ppm
Ethylbenzene
20 ppm
4,4'-Diphenylmethane diisocyanate
0.005 ppm
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory
equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Paste-like compound.
Colour:
Gray.
Odour:
Mild odour.
Odour Threshold:
Not available.
Physical State:
Liquid.
pH:
Not available.
Viscosity:
Not available.
Freezing Point:
Not available.
Boiling Point:
~ 137 °C (~ 278.6 °F)
Flash Point:
None.
Evaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Gravity:
1.18
Solubility in Water:
Negligible.