SDS

MATERIAL SAFETY DATA SHEET
Sakrete Polyurethane Construction Adhesive
01/31/2018
2 / 8
Ethylbenzene
100-41-4
0.1 - 1
4,4'-Diphenylmethane diisocyanate
101-68-8
0.1 - 1
Section 4: FIRST AID MEASURES
Eye Contact:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
If easy to do, remove contact lenses, if worn. Get medical attention immediately.
Skin Contact:
In case of contact, immediately flush skin with plenty of soap and water.
Remove contaminated clothing and shoes. Wash clothing before reuse. Call a
physician if irritation develops and persists.
Inhalation:
If breathed in, move person into fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion:
If swallowed, do NOT induce vomiting unless directed to do so by medical
personnel. Seek medical attention or call poison control immediately.
General Advice: In case of accident or if you feel unwell, seek medical advice immediately
(show the label or MSDS where possible).
Note to Physicians: Symptoms may not appear immediately.
Section 5: FIRE FIGHTING MEASURES
Flammability: Not flammable by WHMIS criteria.
Means of Extinction:
Suitable Extinguishing Media: Treat for surrounding material.
Unsuitable Extinguishing Media: Not available.
Products of Combustion: May include, and are not limited to: oxides of carbon, oxides of
nitrogen, hydrogen cyanide.
Explosion Data:
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Protection of Firefighters: Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker
gear) and respiratory protection (SCBA).
Section 6: ACCIDENTAL RELEASE MEASURES
Personal Precautions: Use personal protection recommended in Section 8. Isolate the hazard
area and deny entry to unnecessary and unprotected personnel.
Environmental Precautions: Keep out of drains, sewers, ditches, and waterways. Minimize
use of water to prevent environmental contamination.
Methods for Containment: Contain and/or absorb spill with inert material (e.g. sand, vermiculite),
then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use appropriate
Personal Protective Equipment (PPE).
Methods for Clean-Up: Scoop up material and place in a disposal container. Provide ventilation.
Other Information: Not available.
Section 7: HANDLING AND STORAGE