MSDS

MATERIAL SAFETY DATA SHEET
Sakrete Flo-Coat Concrete Resurfacer 20 lb. pail
Sakrete Flo-Coat Concrete Resurfacer 40 lb. bag
Sakrete Flo-Coat Concrete Resurfacer 40 lb. pail
4 / 8
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: A NIOSH approved particulate respirator is recommended in
poorly ventilated areas or when permissible exposure limits may be exceeded.
Respirators should be selected by and used under the direction of a trained health and
safety professional following requirements found in OSHA’s respirator standard (29 CFR
1910.134) and ANSI’s standard for respiratory protection (Z88.2).
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Powder.
Color:
Not available.
Odour:
Characteristic.
Odour Threshold:
Not available.
Physical State:
Solid.
pH:
10-12
Viscosity:
Not available.
Freezing Point:
Not available.
Boiling Point:
Not available.
Flash Point:
Not available.
Evaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Gravity:
Not available.
Solubility in Water:
Not available.
Coefficient of Water/Oil Distribution:
Not available.
Auto-ignition Temperature:
Not available.
Percent Volatile, wt. %:
Not available.
VOC content, wt. %:
Not available.
Section 10: STABILITY AND REACTIVITY
Stability: Stable under normal storage conditions. Keep dry in storage.
Conditions of Reactivity: Heat. Incompatible materials. Moisture.
Incompatible Materials: None known.
Hazardous Decomposition Products: May include, and are not limited to: oxides of carbon.
Possibility of Hazardous Reactions: No dangerous reaction known under conditions of normal use.