User Guide

Tape off an area around the repair that will allow the raised section to
be adequetly leveled off and feather edged. This step will also ensure
a neat and clean transition area when it’s time to remove the tape.
Apply Top’n Bond to this section and smooth out the material with a
straight edge trowel.
After letting the Top’n Bond to dry for several minutes, use a paint
brush at the edges of the repair area to blend the Top’n Bond material
to the existing concrete.
This will also give the surface a textured nish which will prevent the
area from being slick.
FINISHING
NOTE: For complete product information, please refer to product data sheet.
APPLICATION
Raised surface repair
Remove the tape and begin smoothing out the repair.
Notice the straight edges. This will allow for more consistency when
feather edging the material.
Feather edge the area with the straight edge trowel.
The Pro’s Choice Since 1936
Repairing a raised Concrete surface
using Top ‘n Bond Concrete Patcher
Project how-to guide
Sakrete.com • 866-725-7383
2