User's Manual
Pairing Your Speaker with a Bluetooth Device
Your speaker can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches,
and most smartphones, laptops and tablets. In order to pair your speaker with a phone, follow the
steps below:
1. Slide the On/Off Switch to the ON position in order to turn on your speaker. By default, your
speaker will go into pairing mode. A symbol will flash on the display screen.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select your speaker to start connecting.
4. Enter “0000” if your device asks for the PIN code.
5. Once paired, the LED Indicator Light will stop blinking and steadily shine blue. Note that
anytime music is playing, the light will slowly blink blue every few seconds.
Switching Modes (Using the TF Card Reader Slot, USB Port & Auxiliary Input)
If a memory card is inserted in the TF Card Reader slot your speaker will automatically go
into Music Mode in which music is played from the memory card. Similarly, if a thumb drive is
inserted into the USB port, your speaker will automatically go into USB mode and play music
from the thumb drive. If an audio source is connected through your speaker’s Auxiliary Port press
the mode button repeatedly until you are in Aux mode. Repeatedly press the Mode button to
switch between Bluetooth Mode, Music Mode, Aux Mode or USB Mode.