User's Manual

Using the Radio Function
Preparing the Radio for Use
Connect one end of the included micro USB charging cable to the Micro USB Charging Port on
the rear of your speaker. Then plug the other end of the micro USB charging cable into a USB
port on your computer or a suitable power adapter. The Micro USB cable will act as an antenna.
Radio Mode
Press the mode button repeatedly until you are in radio mode.
Searching for Stations
Press and hold the button. Your speaker will automatically search for radio stations that it
receives reception from, and save them so that when you press the + or - buttons repeatedly, you
will toggle through these radio stations.
NOTE: If you have trouble receiving stations, try moving your radio to an area with clearer
reception or less outside interference.