User's Manual

Pairing Your Speaker with a Bluetooth Device
Your speaker can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most
smartphones, laptops and tablets. In order to pair your speaker with a phone, follow the steps below:
1.Slide the ON/OFF switch to the ON position to power on your speaker. Make sure that “Blue” appears on
your speaker’s display screen to indicate that you are in Bluetooth mode. If it does not, press the mode
button repeatedly until you are in Bluetooth mode. Once in Bluetooth mode, your speaker will automatically
get ready to pair.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select “Vivitar B60011” to start connecting.
4. Enter “0000” if your device asks for the PIN code.
Note: If a memory card is inserted in the TF Card Reader slot, or a thumb drive is inserted in the USB Port,
your speaker will automatically go into the associated mode. Similarly, if an audio source is connected
through your speaker’s Auxiliary Port your speaker will automatically go into Auxiliary Input Mode (Line In).
Repeatedly press the Mode button to switch between modes.