User's Manual

Charging Your Speaker
Your speaker has a built-in, rechargeable lithium-ion battery. To avoid damage, do not attempt to remove the
battery. The full performance of the battery is only achieved after a few charging-dis-charging cycles. Charge
the battery fully before first use. To do so, follow the steps below:
1. Connect one end of the included USB charging cable to the charging port on your speaker.
Then plug the other end of the USB charging cable into a USB port on your computer or a suitable
power adapter in order to recharge the internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately 5-8 hours to charge when
completely drained.
2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will turn off
when the battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it is not
used on a regular basis.
Important!
To avoid a complete discharge of the battery, charge your speaker at least once every three months.