Datasheet

46
MODEL 22HHP
Bushingmount
Servomount
()
●
General Specifications
Standard Resistance
Values:
Total Resistance
Tolerance:
Independent Linearity
Tolerance:
Resolution:
Output Smoothness:
1k,2k,5k,10k,20k,50k (Ω) (5-turn)
2k,5k,10k,20k,50k,100k ( Ω )(10-turn)
Standard Class ±10% (K)
Precision Class
±5% (J)
Standard Class
±0.35% ±0.25%
Precision Class
±0.2% ±0.1%
Essentially infinite
Below 0.05% against input voltage
(5-turn)
Below 0.015% against input voltage
(10-turn)
Contact Resistance
Variation:
Power Rating:
Electrical Travel:
Mechanical Travel:
Insulation Resistance:
Dielectric Strength:
Starting Torque:
Stopper Strength:
Max. Working Voltage:
Resistance Tempera-
ture Coefficient:
Max. Torque exerted on
fastening the mounting
nut to the bushing:
Mass:
Below 5% C.R.V. (5-turn)
Below 3% C.R.V. (10-turn)
1.0W (5-turn)
2.0W (10-turn)
360°
×n ±5°(n: No. of turns)
360°
×n (n: No. of turns)
Over 100MΩ at 1,000V.D.C.
1 minute at 1,000V.A.C.
Below 5mN
•
m (50gf
•
cm)
Approx. 0.9N
•
m (9kgf
•
cm)
500V
±100p.p.m./
Below 1.0N
•
m (10kgf
•
cm)
(In case of panel thickness with
over 2.5mm., the rotating torque
may become heavier.)
Approx. 20g (Bushingmount)
Approx. 30g (Servomount)
(Both 5-turn and 10-turn)
●
Special Specifications Available
Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), 3-turn type, Multi-ganged (Available
up to 10 gangs), With high torque, Special shaft dia. (∅3mm,∅3.175mm,∅4mm,∅5mm,∅6.35mm), Special machining
on the shaft, With plastic shaft, Metal bushing type (22HHPM with anti-rotation pin), Simple sealed housing, Extra taps
(Available up to 1 tap only for 10-turn), Slipping-clutch incorporated type.
+10°
0°
D
1.5
22
±1
2
13
L
±1
19
±1
7.9
d1
0 -0.05
10.32
0 -0.05
7.6
±0.2
R16.5MAX
1 1.6
1.2
1.6
A
p
p
ro
x.3
0
°
d2
22
±1
2
13
16.5
±1
22
±1
22.23
+0.13 -0.25
19.05
0 -0.03
6
0 -0.02
R16.5MAX
A
p
p
ro
x
.3
0
°
1.57
±0.2
1.57
±0.2
1.57
±0.2
18
●
Standard Model Nos.
Bushingmount type:
5-turn models: 22HHP-5 22HHP-5M
22HHP-5E 22HHP-5N
10-turn models: 22HHP-10 22HHP-10M
22HHP-10E 22HHP-10N
Servomount type:
5-turn models: 22HHPS-5
10-turn models: 22HHPS-10
Model 22HHPS-10
(Servomount)
Model 22HHP-10
(Bushingmount)
●
Standard Dimensions
Note:Dimensions of shaft and bushing are equal to those of model
22HP series with wirewound resistive element and please refer
to those dimensions and notes.
■Bushingmount type
■Servomount type (bronze bearing incoperated)
5-turn 10-turn
LOW-COST ITEM
U.S.A. PAT. No.4400687 F.R.G. PAT. No.3136765 HONGKONG PAT. No.751 of 1984
U.K. PAT. No.2087160 FRANCE PAT. No.8118538 SINGAPORE PAT. No.372/84
Hybrid