Datasheet

123
3
±0.2
10
±1
46
±1
14
±1
14
±
0.4
4
L
±1
28
±1
6
±1
M9 P 0.75
6
0
-0.05
6
±1
46
±1
14
±1
123
1.57
±0.2
2.36
±0.2
L
±1
16.5
± 1
6
0 -0.02
47.63
0 -0.03
50.80
+0.13 -0.25
30
±
0
.2
3 M3
6depth
39
Wirewound
Model 46HD-10
●
Standard Dimensions
●
Standard Model Nos.
Bushingmount type:
46HD-3 (3-turn)
46HD-5 (5-turn)
46HD-10 (10-turn)
46HD-15 (15-turn)
46HD-20 (20-turn)
Servomount type:
46HDS-3 (3-turn)
46HDS-5 (5-turn)
46HDS-10 (10-turn)
46HDS-15 (15-turn)
46HDS-20 (20-turn)
●
General Specifications
Standard Resistance
Range:
Max. Practical
Resistance Value:
Total Resistance
Tolerance:
Independent Linearity
Tolerance:
0.5Ω to 20kΩ (3-turn)
0.5Ω to 50kΩ (5-turn)
0.5Ω to 100kΩ (10,15-turn)
0.5Ω to 200kΩ (20-turn)
50kΩ, 100kΩ (3-turn)
100kΩ (5-turn)
200kΩ (10,15-turn)
500kΩ (20-turn)
Standard Class
±3%
(
H
)
[
±5%
(
J
)
in case of below 1kΩ
Precision Class
±1%
(
F
)]
[
in the pot. with a single-wire
resistive element, the precision
class should read
±2%
(
G
)]
3, 10, 15,
5-turn 20-turn
Standard Class
±0.4% ±0.3%
Precision Class
±0.2% ±0.1%
(Below 5kΩ)
Power Rating:
Noise:
Electrical Travel:
Mechanical Travel:
Insulation Resistance:
Dielectric Strength:
Starting Torque:
Stopper Strength:
Max. Working Voltage:
Resist. Temperature
Coefficient of Wire:
Mass:
2.0W (3-turn)
2.5W (5-turn)
5.0W (10-turn)
7.5W (15-turn)
10.0W (20-turn)
Below 100Ω E.N.R.
360°
×n ±5°(n: No. of turns)
360°
×n (n: No. of turns)
Over 100MΩ at 1,000V.D.C.
1 minute at 1,000V.A.C.
Below 20mN
•
m (200gf
•
cm)
(Bushingmount type)
Below 10mN
•
m (100gf
•
cm)
(Servomount type)
Approx. 0.9N
•
m (9kgf
•
cm)
900V
±20p.p.m./
Approx. 90g (3,5-turn)
Approx. 120g (10-turn)
Approx. 150g (15-turn)
Approx. 180g (20-turn)
+10°
0°
●
Special Specifications Available
30-turn type (S46HD-30), Multi-ganged, (Available up 2 gangs), With limit-switches, Shaft with front and rear
extension (in case of bushingmount type, rear shaft with 6mm dia. and 28mm length together with the bushing of M9
× 10mm and in case of servomount type, rear shaft with 6mm dia. and 15mm length), Shaft dia. (∅6.35mm)
•
bushing
with inch dimensions, Simple sealed housing, Oil-filled type (OF46HD), Special machining on the shaft.
MODEL 46HD
Bushingmount
Servomount
()
■Servomount type
Note: 1. 1 pc. each inner teeth washer and hex nut are attached.
2.
Please process the mounting hole on the panel to be mounted
with this potentiometer by the diameter of 9.0mm .
■Bushingmount type
Model No.
46HDS-3
46HDS-5
46HDS-10
L
43.5
61.5
46HDS-15 80
46HDS-20 100
Model No.
46HD-3
46HD-5
46HD-10
L
38.5
56
46HD-15 75
46HD-20 94.5
+
0.05
0
(±0.25%) (±0.15%)