Specifications

R
CHIEF 2000 HERTZ DC INVERTER WELDER
USERS MANUAL
Specifications
Power Supply...............................................................190 / 230 V - 50 / 60 Hz
3 phase + ground
or single phase + ground
Transformer...................................................................2,000 Hz rectified current
Transformer Class........................................................H (180° C)
Maximum Welding Power.............................................47,3 kVA
Thermal Protection.......................................................Yes
Full Load Amps.............................................................60 A
Breaker For Welding Up To 1.5mm Sheet..................40 A Slow Action Type
Breaker For Use Of Full Power Of Machine...............60 A Slow Action Type
Supply Cable Up To 60 Foot Distance (
*)...................3 x 10 Ga. + Ground (On 3 Phase Use)
From Main Breaker * 3 x 8 Ga. + Ground (On Single Phase Use)
Electrode Force.............................................................375 LBS. At 85 PSI (6 bars)
Dimension (With Pincer And Pistol Bracket)
W x D x H....................................................................27” x 30” x 41”
Total Weight (With All Accessories And Cables).......245 LBS.
* Due to low work rate of this type of machine (maximum permanent current = 3 minutes per
hour), the admissible wire size is lower than recommended by international standards for this type
of breaker as the standards refer to a permanent use.
13