User manual

PID Loop Operation
(DL450 Only)
Maintenance
and Troubleshooting
8--60
PID Loop Operation (DL450 only)
DL405 User Manual, 4th Edition, Rev. A
DirectSOFT Ramp/Soak Example
The following example will step you through the Ramp/Soak setup.
The first step is to use Setup in DirectSOFT PID to set the profile of your process.
Open the Setup PID window and select the R/S tab, and then enter the Ramp/Soak
data. Note the V--memory location for the beginning of this profile is V5000, and
V5037 is the end of the range of the profile.
Setup the Profile in
PID Setup