Technical information

Dionex VP Vacuum Pump Installation
12 Doc. 065186-02 1/12
5.2 Chromeleon Setup
This section briefly explains how to perform two tasks:
Select a relay output for remote on/off control of the Dionex VP
Program relay control of the Dionex VP in Chromeleon
If you need detailed instructions, refer to the Chromeleon users guide or
Help.
1. If it is not already running, start the Chromeleon Server Monitor.
(Select Start > All Programs (or Programs, depending on the
operating system) > Chromeleon > Server Monitor.)
The Server Monitor window opens.
2. The Server Monitor status message should be “Chromeleon Server is
running idle.”
3. Open the Chromeleon Server Configuration program. (Select Start >
All Programs (or Programs, depending on the operating system) >
Chromeleon > Server Configuration.)
4. Click the + sign next to the timebase that includes the controlling
device for the Dionex VP.
5. Right-click the icon for the controlling device.
The Properties dialog box for the device appears.