Installation manual
Major Accessories
60
ID100 Autodilutor
The Thermo Scientific ID100 Autodilutor provides rapid, in-line preparation of calibration standards
and intelligent or fixed ratio dilution of samples for flame measurements. It is based on a high
precision multi-piston pump that is calibrated for life and does not require any consumable
items. It can be used with manual sampling or with any of the flame autosamplers.
Standard Items: ID100 Autodilutor
Necessary Additional Items: None
Power: 110 V – 240 V at 50 or 60 Hz
Power Consumption: 85 VA
Ordering Information
Description Part Number Price (US) Price (CAN)
ID 100 Autodilutor 942347003201 CALL
ID 100 Consumable Kit 942345003201 $ 410.00 $ 492.00
Slotted Tube
Atom Trap
The Thermo Scientific Slotted Tube Atom Trap (SLAT) accessory provides a useful increase in
flame analytical sensitivity for volatile elements, such as Cd, Zn, Pb, and Cu. Provides a potential
of 2 to 5 times improvement in sensitivity for certain volatile elements on flame systems when
employing a 50 mm burner. The tube is slotted to allow the atom cloud residence time to be
significantly increased in the measuring optical beam.
The SLAT consists of a silica cell with a mount for 50 mm burners and enables the tube to
be rotated into, and out of, the actual flame.
Standard Items
• STAT Holder
• 5 Quartz STAT tubes
Necessary Additional Items: 50 mm Universal T
itanium Burner
Power: 110 V – 240 V at 50 or 60 Hz
Power Consumption: 85 VA
Ordering Information
Description Part Number Price (US) Price (CAN)
Slotted Tube Atom Trap (STAT) 942339035011 $1,198.00 $1,438.00
Variable Flow
Auxiliary Oxidant Kit
The Thermo Scientific Variable Flow Auxiliary Oxidant Kit allows the flow rate of the auxiliary
oxidant gas that can be supplied to an air/acetylene flame to be varied over a wide range, in
order to allow the flame chemistry to be optimized when using less common organic solvents.
Note: all flame instruments include a fixed flow rate auxiliary oxidant facility for air/acetylene
flames that is suitable for the organic solvents most commonly used.
Standard Items
• Variable Flow Auxiliary Oxidant Kit
Necessary Additional Items: None
Ordering Information
Description Part Number Price (US) Price (CAN)
Variable Flow Auxiliary Oxidant Kit 942339346111 $1,003.00 $1,204.00
Thermo Scientific
To inquire or order within the US: Phone: 1-800-532-4752 Fax: 561-688-8731 E-mail: usmad-servicepartsorder@thermofisher.com.
Canada: Phone: 1-800-530-8447 Fax: 905-890-9161 E-mail: camis.sidservice@thermofisher.com Web: www.thermo.com/lifecycle.
Contact numbers for all offices outside the US and Canada can be found on the back cover.