Installation manual

4
Thermo Scientific
EMT Torch Liquid
Sample Handling Kits
The Duo view system of the iCAP 6000 Series
offers the option of using either axial or radial
view to provide the widest choice of alternatives.
Furthermore, the iCAP 6000 Series has a number
of optimized sample handling kits available,
covering the main application types to reduce
performance problems. These are all plug and
play, self-aligning kits. Routine cleaning and alignment operations are extremely simple to
carry out. The semi-demountable torch modules (original Tulip and new EMT Torch designs)
simply clips into place while automatically making gas-tight connections. Note: The new EMT
Torch design is a standard component of the Sample Handling Kits. This torch design has been
developed to provide enhanced matrix tolerance and analytical performance for organic solvents
and high dissolved solids samples.
The standard sample handling kit is fitted to all systems, and optional kits for organics,
volatile organics, HF-based and high solids solutions are available to fit Duo view systems.
The axial view mode is preferred for clean water analysis, such as drinking water, where
it gives the best detection limits. However, in situations where high interferences may be
encountered, the radial mode may provide better performance. For organics like lubricating
oils, it is likely that the dedicated Radial view system is best. Two types of pump tubing are
available, one for use with aqueous-based solutions and one for organics-based solutions.
Whatever the sample, the iCAP 6000 Series has the answer.
Ordering Information
Description Part Number Price (US) Price (CAN)
Duo EMT Standard Kit 8423 120 51891 $1,049.00 $1,259.00
For normal aqueous sample solutions containing
relatively low acid contents (except for hydrofluoric acid) or up to 3% m/v
dissolved solids. The axial view system is especially good for clean
(i.e. drinking) water and some environmental samples which require
the best detection limits. The kit includes:
EMT Duo Quartz Torch 8423 120 51841 $ 241.00 $ 289.00
EMT Quartz Center Tube, 2 mm ID 8423 120 51971 $ 112.00 $ 134.00
EMT Torch Holder Assembly 8423 155 50171 $ 76.00 $ 91.00
EMT Center Tube Holder Assembly 8423 155 50181 $ 61.00 $ 73.00
Duo Spray Chamber Adapter 8423 120 51251 $ 79.00 $ 95.00
Glass Spray Chamber 8423 120 51411 $ 370.00 $ 444.00
Concentric Glass Nebulizer 8423 120 51431 $ 357.00 $ 428.00
Ball Joint Clip 8423 120 51421 $ 28.50 $ 34.25
Pump Sample Tubing, Aqueous 8423 120 51511 $ 31.50 $ 37.75
Pump Drain Tubing, Aqueous 8423 120 51521 $ 31.50 $ 37.75
Duo EMT Organics Kit 8423 120 51801 $1,500.00 $1,800.00
For sample solutions containing relatively
non-volatile organic solvents, such as xylene, toluene, white spirit and
kerosene. The Duo option is not recommended for use in lubricating oils
analysis, especially of wear metals in used oil. Dedicated radial view
ICP systems are likely to be better suited. The kit includes:
Pump Drain Tubing, Aqueous 8423 120 51521 $ 31.50 $ 37.75
EMT Quartz Center Tube, 1 mm ID 8423 120 51941 $ 112.00 $ 134.00
EMT Torch Holder Assembly 8423 155 50171 $ 76.00 $ 91.00
EMT Center Tube Holder Assembly 8423 155 50181 $ 61.00 $ 73.00
Duo Spray Chamber Adapter 8423 120 51571 $ 52.00 $ 62.00
Spray Chamber, Organics 8423 120 51311 $ 277.00 $ 332.00
V-Groove Nebulizer 8423 120 51321 $1,321.00 $1,585.00
Ball Joint Clip 8423 120 51581 $ 22.00 $ 26.00
Pump Sample Tubing (Viton), Organics 8423 120 51531 $ 165.00 $ 198.00
Pump Drain Tubing (Viton), Organics 8423 120 51541 $ 165.00 $ 198.00
Continued
Duo Sample
Handling Kits
To inquire or order within the US: Phone: [phone] Fax: [phone] E-mail: [e-mail].
Canada: Phone: [phone] Fax: [phone] E-mail: [e-mail] Web: www.thermo.com/lifecycle.
Contact numbers for all offices outside the US and Canada can be found on the back cover.