SDS

Saint-Gobain Technical Fabrics MSDS Page 2 of 3
SKIN CONTACT:
Wash with mild soap and running water. Use a washcloth to help remove
fibers. If irritation persists, consult a physician.
INGESTION:
Unlikely entry route. If symptoms develop consult a physician.
NOTE TO PHYSICIAN:
No special instructions
Section 5. Firefighting Information
FLASH POINT:
N/A
METHOD USED:
N/A
FLAMMABLE LIMITS:
N/A
LOWER FLAMMABLE:
N/A
UPPER FLAMMABLE:
N/A
EXTINGUISHING MEDIA:
Water, water spray, foam, carbon dioxide, dry chemical
FIRE & EXPLOSION
HAZARDS:
N/A
FIRE FIGHTING
INSTRUCTIONS:
Thermal decomposition of fabric coating may cause irritating smoke and
fumes.
FIRE FIGHTING EQUIPMENT:
Fire fighters should wear appropriate protective equipment including NIOSH
approved respirators.
Section 6. Accidental Release Measures
SPILL OR LEAK:
Spills should be cleaned up with a vacuumed or by a wet sweeping
technique. Do not use compressed air. HEPA filter recommended.
Section 7. Handling and Storage
Store in a dry place. Avoid direct sunlight and wear P.P.E. appropriate for
your situation.
Section 8. Exposure Controls / Personal Protective Equipment
VENTILATION:
Mechanical ventilation recommended for process machinery where dust
generation is expected.
RESPIRATORY
PROTECTION:
Where dust levels exceed the TLV, use an NIOSH approved respirator and
PPE against nuisance dusts.
SKIN PROTECTION:
Wear protective cotton gloves
EYE PROTECTION:
Wear safety glasses, to minimize eye contact during cutting operations.
EXPOSURE GUIDELINE (S):
Avoid generating dusts and if PEL is exceeded use PPE, barrier creams and
suitable clothing to avoid nuisance dusts.
Section 9. Physical and Chemical Properties
APPEARANCE
Glass Yarn Scrim with
Coating and Adhesive
PHYSICAL STATE
Solid
BOILING POINT
N/A
SOLUBILITY IN WATER
Adhesive is soluble
EVAPORATION RATE
N/A
SPECIFIC GRAVITY
2.5 (water = 1)
FREEZING POINT
N/A
VAPOR DENSITY
N/A
MELTING POINT
N/A
VAPOR PRESSURE
<0.1mm Hg
MOLECULAR WEIGHT
N/A
VISCOSITY
N/A
ODOR
N/A
% VOLATILE
Non Volatile
pH
N/A
STATIC CHARGE
Can build Static Charge
Section 10. Stability and Reactivity
CHEMICAL STABILITY:
Stable
INCOMPATIBILITY:
Avoid strong oxidizers, water
HAZARDOUS DECOMPOSITION
PRODUCTS:
CO, CO₂, Hydrocarbons, Oxides of Nitrogen
HAZARDOUS POLYMERIZATION:
Does not occur.