Use and Care Manual
Although powder-coated MDF is a durable, seamless surface, it 
is  not  completely  impervious  to  stains  and  damage  from  moisture  or 
heat.  Simply  take  the  same  precautions  you  would  with  any  wood 
furniture. Avoid dragging sharp or rough objects across the surface of 
your furniture. Use adhesive felt pads, trivets, coasters and placemats 
to help prevent scratches. Use a slightly damp cloth to clean as needed. 
For spot cleaning, use an all-purpose cleaner or a solution of water and 
mild detergent. Wipe Dry 
Steel, also known as inox, is an alloy that does not readily rust 
nor wear with excessive cleaning. However, all grades of steel will stain 
and discolor without proper maintenance and cleaning. Although they are 
not  hard  to  maintain,  steel  furniture  requires  a  little  cleaning  and 
maintaining to keep them shinning and functioning well. If not properly 
cleaned, they can develop rust that is going to inhibit their functionality. 
Steel is superior to other metals because it contains other metals such 
as nickel and chromium that prevents it from easy corrosion. However, 
galvanized  
steel  should  not  be  confused  with  stainless  steel.  Galvanized  steel  is 
steel that has been coated with a layer of zinc. 
The  first  step  in  cleaning  is  removing  any  physical  item  that  may  be 
laying on the surface you are about to clean. The surface should be free 
of  any  items,  especially  those  items  that  can  be  damaged  while 
performing cleaning. 
After you wipe any dirt or debris on the surface, gather the items that 
you  are  going  to  use  while  cleaning.  Non-abrasive  cleaning  rags  are 
preferred because they don't leave any residue lint. Paper towels can 
also be used, but they tend to leave some lint that is visible when 
the furniture dries. 
Dish  soap  is  the  best  agent  for  cleaning  grime on  steel  surfaces. 
Most steel restaurant furniture is contaminated by grim that comes 
from  the  food  that  the  restaurant  serves.  Dish  soap  is  good  at 
breaking the bond between the steel surface and oil that may settle 
there. 
To clean it, put some dish soap on your rug and add a little 
water  on  it  to  moisten  it.  Wipe  over  the  surface  that  you  are 
cleaning. If  there  is a stubborn stain or an oil deposit, you may 
have to go over the stain several times to disintegrate and remove 
it. 
After you finish wiping, rinse the rag and wipe over any remnants 
of  the  cleaning  solution  or  moisture  from  the  surface  of  the 
furniture. After it has dried, drop a few drops of mineral or baby oil 
on  a  dry  rug.  Rub  the  rug  against  the  item  until  it  is  properly 
polished 


