User manual

Chapter 2: Operation
20 Setup
Scan
Resume
Scan resume time, in seconds. When the programmed time of
inactivity has elapsed, and when watch/scan has been aborted
using a press on PTT, or after power-up, scan or watch is
resumed.
OFF: Automatic resume is deactivated (default)
3, 6, 10, 15, 20, 25, 30: Resume time in seconds.
Watch
Mode
DUAL: Dual watch monitoring the working channel and the
priority channel (channel 16, default for international channels).
TRIPLE: Triple watch. The working channel is watched with the
priority channel (channel 16) and the programmed call channel
(if any, otherwise dual watch).
Priority
Scan
ON: All channels tagged for scanning are scanned while
monitoring channel 16. (default).
OFF: Only the channels tagged for scanning are scanned in
sequence, not channel 16, unless it is tagged for scanning.
ATIS code The ATIS code (Automatic Transmitter Identification System) is
used for identification to marine coast and inland stations and
its use is mandatory in a number of European inland waterways
such as e.g. the river Rhine. Like the MMSI number the ATIS
number is issued by the relevant authority.
ATIS for foreign leisure crafts: For ships coming from states
which are not member of the Regional Arrangement the ATIS-
Code is based on the MMSI with a 9 as the first digit.
a
Note: The ATIS number can be programmed once. If a wrong
number has been entered and stored, or if there is a requirement
to change it, contact your authorized dealer.
Parameter Description