Installation manual

Chapter 3: Installation

Power, VHF antenna and external equipment 59

3333

Installation

The following sentences are supported:

• FSI: All fields are decoded

• GGA: UTC, "Position", "quality indicator". All other fields are unused

• GLL: UTC, "Position", "Status" and "mode". All other fields are unused

• GNS: UTC, "Position" and "mode". All other fields are unused

• RMC: UTC, "Position", "Status", "Date" and "mode". All other fields are

unused

• ZDA: UTC, "Day", "Month", and "Year". All other fields are unused

In accordance to the standard EN61162-1:2008 and EN61162-2:1998

Received NMEA sentences except for FSI can be forwarded to NMEA output. As

talker the sentences are streamed with no intervals.

HW revision: 57-127368-D.02

SW revision: 2.00.01

CTRL connector for control speaker microphone

Connector type: Circular connector, 12pin.

Pin assignment: Connector front view on the VHF radio:

Pin Description Pin Description

1 GND for cable screen 7 Internal GND = - Battery

2 Internal GND=- Battery 8 not used

3 Bat_SW Supply Voltage when on 9 RX out +

4 Bat_SW Supply Voltage when on 10 RX out -

5CAN+ 11TX in +

6CAN- 12TX in -