Installation manual

Chapter 2: Operation
DSC calls 39
2222
Operation
4. Press EXIT to return to normal radio operation.
DSC setting Description
Position Info Available position information.
Here you can enter position data, see also Position
and MMSI Information on page 8.
Auto-Ack Test Auto-acknowledgement of test DSC messages
OFF - Disabled
ON – Enabled (default)
Auto-Ack Individual Auto acknowledgement of individually addressed,
non distress DSC messages
OFF - Disabled (default)
ON – Enabled
Non-Distr. Inactivity Inactivity time-out to exit non-distress functions
(e.g. in setup) without automatic time-out (OFF):
Range: OFF, 1 to 30 minutes, in 1 min. steps
Default: 15 min.
Distress Inactivity Inactivity time-out for received distress DSC
automated procedures without automatic time-
out:
Range: OFF, 1 to 30 minutes, in 1 min. steps
Default: OFF
Comm Inactivity Inactivity time-out of non DSC communication
(VHF).
Range: 10 to 600 seconds, in 10 s steps
Default: 30 s
Non-Distr.Alarms Non-distress DSC alarms
OFF: Disabled
ON: Enabled (default)