Installation manual

Chapter 2: Operation
16 VHF radio communication
5. Press the soft key OK to confirm the entered value
and to leave edit mode.
6. Press EXIT to return to return to the standard VHF
display.
Display for non-VHF applications
When the radio is used for functions other than VHF, the display is arranged
differently. The large channel display moves to the bottom line along with
selected icons.
The channel displayed in this line will always reflect the communication
channel on which the radio is tuned into for communication.
If PTT is pressed the radio transmits on the displayed channel (not valid for
hailer mode).
If a signal is received the signal is received on the displayed channel.
14
OK
BACK
CLEAR
CANCEL
INT
NEW_
PROGRAM