Installation manual

Chapter 2: Operation
VHF radio communication 15
2222
Operation
Programming a call channel
To program a call channel (or quick selection), do as follows:
1. Make an extra-long press (2.5 s duration) on the 16/C key.
2. Press the soft key CALL CH. The channel designator is flashing.
3. Turn the selector wheel knob to select the desired channel.
4. Press the soft key OK to confirm the new call channel and leave
edit mode.
Naming a channel
To name a channel, do as follows:
1. Make an extra long press on the 16/C key until NAME is shown
in the display next to one of the soft keys.
2. Turn the selector wheel knob to select the channel you want to name.
3. Press the soft key NAME.
4. Turn and press the selector wheel knob to enter the name, letter
by letter. Press BACK to move one character to the left. Press
CLEAR to the delete the current character and the following
characters. A long press on CLEAR deletes all characters.
Weather (WX) Weather channels have the prefix W. (For US and CA
channels only.)
Private (PRIV) Up to 40 user-defined private channels. Contact your dealer
for programming private channels.
VHF channel table Description