MG ZS Owners Handbook
Contents Preface .......................................................................................................................................... 1 Special announcement ................................................................................................................. 3 Preparing before using ................................................................................................................. 4 Basic Operation .........................................................
Preface Thank you for choosing and using our products. Please read this manual carefully before using the product to have a clear understanding of operation, so that you can get a better driving experience. It should be kept properly for future use! Caution: In order to prevent fire or electric shock do not expose the machine to rain or humid environment. There are dangerous high voltage parts in the machine,so don't open the cover.Qualified maintenanc personnel must be entrusted to carry out maintenance.
Preface 7 When there are faults and abnormalities: When odor and other abnormal circumstances occur on the machine, please immediately stop using and turn off the power supply, and contact the distributor,in order to avoid the risk of fire or electric shock. 8 Avoiding heat sources: Do not install the unit near the place of direct sunlight and high temperature. 9 Using proper power supply:Thisunit is designed to use 12V dc cathode grounding battery system.
Special announcement Attention: Please follow the instruction manual when using this unit.The damage caused by illegal operation is not covered by the warranty. All operations should be based on the actual product. Related to software upgrade,please contact with local dealers. A series of abnormal conditions caused by unauthorized installation of unauthorized software are outside the scope of free warranty. 1 The appearance of the product shown in this manual may differ from the physical object.
Preparing before using seconds to shut down the host.Turn left to lower the volume; Rotate to the right to increase the volume. ④ Navigation: click to enter the navigation interface. ⑤ Setting: press down to enter the setting interface, and press long to enter the voice interface. ① ② ③ ④ ⑤ ① Home: press the button to return to the main interface. ② Return: press to return to the previous level. ③ Power: in the ACC ON startup state, press the button.
Basic Operation Main Menu After the car is started or ACC is opened and other devices are started,the main menu interface can be entered. Phone-can enter the Phone interface. Radio-can enter the Radio interface Merdia- can enter the Merdia Player interface. Navigation-can enter the navigation interface. Use help-you can enter the use help interface. Settings-can enter the setting interface.
Basic Operation Radio Touch the [Radio] button in the main menu,then enter button in the main menu,then enter connection page. valid frequency points to the list). Press or button to achieve radio frequency point SEEK-/+. Press the button to search and overwrite the stored radio station. Manually save frequency points: Example:long press the save station button to display the highlighted state of the frequency point,that is, to save the frequency point.
Basic Operation Click the button on the USB Music interface to enter the list of songs. Press the button to switch the previous one. Press the button to switch to the next one. Press the button to pause the current music. Press the button to start playing the current music. Currently displayed as play mode. The current display is in single loop mode. The current display is random play mode.
Basic Operation Bluetooth Music Touch the button of Bluetooth Music to enter the interface of bluetooth music. Phone Press the [phone] button on the main menu to enter the phone interface. Press the button to switch the previous one. Press the button to switch to the next one. If the bluetooth is not connected,enter the bluetooth setting interface to modify the device name. Press the button to pause the current music. Press the button to start playing the current music.
Basic Operation Use Help Settings Press the [Use Help ] button to enter the Use Help interface. Press the [setting] button on the main menu to enter the setting interface. Paired device-view bluetooth paired devices. Rename-can modify bluetooth device name. Matching device-optionally disconnect or connect to a new device. Sync contact-optionally turns on or off sync contacts. Available wiifi-optional available wireless network. WIFI-WIFI can be turned on or off. Hot spots settings-hot spots can be set.
Basic Operation Press the [vehicle] button on the setting interface to enter the vehicle setting interface. Brightness-adjustable brightness. Car lights Follow Me Home-you can choose to turn them on or off to follow me home. Car light Find My Car-can be turned on or off to find my car. Steering Wheel Button*Function-select mobile phone, car or home page mode. Steering-select city, standard or dynamic mode. Press the [general] button on the setting interface to enter the general setting interface.
Basic Operation Language-can be set to English or Espana. Theme-can be set to red&black, green, purple. Temperature-can be set to ℃ or ℉. Time-can be set to 12H or 24H. Press the [system ] button on the setting interface to enter the system setting interface. Native information can be viewed.
Navigation Navigation Press the Navigation button on the main menu to enter the navigation interface. 1 Basic map interaction Users can easily pinch to zoom and pan to explore the map. In addition to gestures, user scan use zoom controls to zoom the map. 12 2 Selecting location Users can select any location by long pressing on the map.The system will display a Contextual Pop-up containing a reversed geocoded address of the selected location.
Navigation 3 Straight On NIP(SONIP) When a user is driving and facing a long straight stretch of road of a few kilometers,the NIP shows the next non-straight-instruction. However,the user might confuse the instruction which meant for kilometers away with the instruction at the upcoming exits. So, we introduced the SONIP (Straight On Next Instruction Panel) to help the user to focus on passing the upcoming exit.The SONIP is currently available for highways only.
Navigation disappears after passing a decision point or after tapping it.After the SONIP disappears, the NIP reappears.zoom controls to zoom the map. 4 Guidance map view The guidance view is used to guide the user along the is normally in 3D, but can be set to 2D in Settings, under the Appearance option. The guidance view is shown when the user starts driving.The current location and details along the route, including 3D buildings in cities are shown.
Navigation Drive to Work Select this button to plan a route to the Work location. This button available only if the Work location is set. Other buttons The following buttons are available in the Main Menu screen, in addition to the navigation buttons: Icon Name Behavior Search Select this button to open the Seetings Menu. Help Select this button to open the Help Menu. Edit button Select this button to reorder menu items. Select this button to show saved places.
Navigation Voice Instructions ON Select this button will switch off voice instructions. the user will no longer hear spoken route instructions but will still hear informsuch as traffic informaion and warning sounds. Voice Instructions OFF Select this button will switch on voice instructions. Night mode Select this button to increase the brightness of the screen and display the map in brighter colors.
Navigation on the map or tapping the Speed Panel both in 2D and 3D map view. 8 Address or city search A user can enter a full address (e.g.23 Oxford street, London), partial address (e.g. Oxford street or Oxford street, London), city name or a city area. The system will show matching resultsas the user types. If the user has entered a full address,the user will be able to preview that address on the map when the matching result is selected.
Navigation If the use enters a city name or area,the matched result will show at the top of the result list.By selecting a city or an area,the user will be asked to specify an address in that city or area. 9 Latitude Longitude search Users can search for a pair of coordinates by selecting Latitude Longitude search type. The keyboard would change to a special keyboard for coordinate entry. Coordinates can be entered in one of the following formats: • Decimal values,for example,51.508742-0.142822.
Navigation 10 Planning a Route using the map in Home screen Users can easily plan a route by selecting a destination on the map in the Home screen. User can browse map using the zooming controls or any of supported gestures to find a destination (See Section 0). By the long press at the selected location, the system will display the contextual pop up containing Drive button. The user can also tap on any favorite location or POI displayed on the map, to plan a route to it.
Navigation When the user taps the Drive button, the system will plan a route from the current location to the selected destination. The route planning behavior is the same as described in Section Planning a Route using Search. 11 Planning a Route using My Places A user can select a destination by selecting one of the favorite locations or recent destination listed in the My Places menu. The user can also access recently driven destination via My Places menu.
Navigation If there was a route already planned the route will be re-planned from the starting point to the existing destination. Otherwise, the user will need to set a destination after setting the starting point. The planned route is not an active route meaning that the user won’t get guidance for this route.Instead of the arrival time the duration is shown in the ETA panel.
Navigation 13 Route Management When there is a route planned,the user can manage the route by selecting one of the following options available in Current Route menu: Icon Name Behavior Clear Route Select this button to clear the currently planned route. Skip Next Stop Select this button to skip next stop on the currently planned route. Find Alternative Select this button to get two alternative routes for t the currently planned route.
Navigation Drive to Route Select this button to calculate a route from the current location to the starting point of the route. Stop Route Preview Select this button to stop route preview. All the options available in the Current Route menu are also available in the contextual menu of the route object on the map.
Navigation NavApp will warn you if there are faster alternatives available When this dialogue pops up,the system will also prompt the user using voice that a new alternative was found so that the user can select the user does not provide any input within certain period of the time, the dialogue will time-out and alternative route proposal will be ignored. 16.
Navigation make better decisions that save time, reduce stress and make the roads a safer place. TomTom Traffic will send updates to the navigation application every 2 minutes and will adjust the Estimated Time of Arrival (ETA) when applicable. NavApp provides the best view on traffic as we are providing a view beyond the next turn instruction.As soon as the navigation application is started a 2D map is shown including the traffic situation, this provides the best overview from a user point of view.
Navigation minute while a delay under 30 seconds is not shown. NavApp allows interaction with the map to see detailed real time traffic information. The traffic pop-up contains the following information if available: type, cause, length and delay. 19 My Places Users can see their favorite locations on the map and personalize their map with My Places. This makes it easier to find and navigate to favorite locations again and again.Favorite locations are also stored and accessible via the My Places menu.
Navigation Users can create favorite locations either via the map or using Search. Users can also rename or delete their favorite locations.
Navigation 20 My Routes Users can save their favourite routes, itineraries in order to easily select them at any point of time.The saved routes and itineraries can be accessed via the My Routes menu. Users can name saved routes and itineraries.Users can also delete routes and itineraries from My Routes menu. Recorded tracks are also accessed via My Routes menu. 21 User Settings Users can personalize their devices by changing the default setting options.
Navigation The following settings options are available in NavApp: Icon Name Behavior Appearance Select this option to change appearance of Nav App by,for example,customizing which elements will be displayed in the Route Bar or Guidance view. Maps Select this option to change the currently selected map. Route Planning Select this option to change route planning preferences such as route type or route features. Sounds & Warnings Select this option to customize safety and speed camera warnings.
Technical Parameter Operation Environment: ITEM Operating voltage 12V (DC) Voltage range 9~16V（DC) Max current Max 10A Closed-circuit current Max 1.
FCC Warnings Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note：This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAIC MOTOR AUSTRALIA SAIC Motor Australia PO BOX A916, SYDNEY SOUTH NSW 1235 WWW.mgmotor.com.
