User Manual

1）Lane change flashing: When set to on, after user turn off the change
lanes shifter immediately, the lane change lamp will flashing three times.
When it is set to off, it will only flashing once.
2）Interior lighting extending time: According to the time set, start
counting timing after power off (ON won’t count time, the indoor light
will always be on), if the state of the car changes during timing, such as
key position, door switch, unlocking, etc, the indoor lamp time counting
will be re-calculated. Can be set to 10min, 20min, 30min, the default is
10min.
3）Time setting for Walk me home: set to 30s, after the user locks the car,
the headlights will automatically turn off after 30s; so is 50s and 75s.
Trigger method: the vehicle is turned off, the headlights continuously
turned twice and closed the door, and lock the car. When user leaves the
vehicle, the headlights of the vehicle will continue to be illuminated, and