Datasheet

www.saia-burgess.comMotor Products
|
131
SAMOTRONIC101
Electronics for Stepper Motors
Driver Board
SAMOTRONIC101
Driver
Dimensions (mm)
Supply voltage (VDC)
Motor current
Step mode
Clock source
Control inputs to
Configuration
for unipolar motors
55 x 40
10-24
constant voltage drive
full/half step
internal or external

inhibit internal clock

inhibit motor current

change direction of rotations
via DIP-switch, potentiometer
Preferred Range
Ordering Reference
4 636 6608 0 If motors are also to be ordered please state: “with MTA-100 receptacles for use with SAMOTRONIC101“.
4 636 6608 3 with screw terminal for motor connection, max 0,5 mm
2
Technical Data
Supply voltage 10-24 VDC
Phase current ∅ 350 mA
Control signal level LS-TTL (0-5V) for all control inputs
Internal clock 50-360 Hz
External clock up to 2 kHz
Dimensions 55 x 40 mm
Operating temperature -5 to +50 °C
Storage temperature -20 to +70 °C
Dimensions
130
For latest technical and safety compliance information
regarding these products, please download the relevant
data sheet from our web site:
www.saia-burgess.com/drivers
Motor_Products_chs.indd 131 16.02.2006 10:38:01