User Manual

28
8. - IR CONTROLLER
You can control the device through the use of a dedicated IR remote control included in the
package.
STAND-BY: Pressing this button the device will come in
“0 position” and enter in IR-mode.
FULL ON: Pressing this button, the unit will show the
“UHI” fixture. Using the other buttons, it will be
possible to adjust all the lighting settings.
GOBO: Pressing “GOBO” button, then a number
between 1-7, it’s possible to choose one of the 7 gobos.
STROBE: Pressing “STROBE” button, then a number
between 1-9, it’s possible to choose 9 different strobe
speed.
COLOR: Pressing “COLOR” button, then a number
between 1-7, it’s possible to choose one of the 7 colors.
DIMMER +/-: Allows you to adjust the value of the
dimmer.
1-9: You can use the digits from 0 to 9 to set a value
within any menu.
SHOW: Pressing “SHOW” button, then a number
between 1-7, it’s possible to choose one of the 7
programs.
SOUND ON/OFF: Using one of these 2 buttons it’s
possible to enable/disable the sound mode during a
fixture of a preset program.