User Manual

24
5.1.3 – SCREEN MENU (SCN)
The “SCREEN” menu allows the manual setting and saving of a scene, which can be activated
at any time by selecting the option “UHI” form the MAIN menu.
In the case where the unit is turned off in “UHI” mode, at the next turning on, the projector
will return to the stored position.
DIM
000 … 255
Dimmer from min (000) to max
(255)
STB
000 … 255
Strobe from min (000) to max
(255)
PAN
000 … 255
PAN position
PANF
000 … 255
PAN fine position
PANS
000 … 255
PAN movement speed
TILT
000 … 255
TILT position
TILTF
000 … 255
TILT fine position
TILTS
000 … 255
TILT movement speed
COLR
000 … 255
Color
GOBO
000 … 255
Gobo
5.1.4 – PROGRAM MENU (PRG1-7)
The “PROGRAM” menu allows to the user to enable one of the seven programs preset on the
device, setting the speed, dimmer and strobe values.
SPED
000 … 255
Auto mode speed
DIM
000 … 255
Auto mode dimmer
STB
000 … 255
Auto mode strobe from min (000)
to max (255)
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
 Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
 Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAU → SLA).
 Operate the Master unit in Automatic mode (AUTO), Macro Color (COLO), Static (STAT) or
Musical (SOUN) to operate the entire system. The entire chain of Slave unit will act as the
Master unit.