User Manual

19
5. - SETUP
5.1 - MENU
DMX
A001 – A512
CH 1 / CH 2 / CH 4 / CH 7 / CH 8 / CH9 / CH11
SOUN
SOU1
SEN0 - SEN9
Sound mode 1 with microphone
sensitivity adjustment
SOU2
SEN0 - SEN9
Sound mode 2 with microphone
sensitivity adjustment
SOU2
SEN0 - SEN9
Sound mode 3 with microphone
sensitivity adjustment
COLO
C-000 - C-255
FL00 - FL99
Dimmer intensity with strobe
frequency adjustment
ATF
Uxxx - Cxxx
Manual intensity adjustment for
each color
SET
LED
ON / 10S / 20S / 30S / 60S
Time of LED display on
RSET
Reset factory parameters
RENO
ON / OFF
Remote controller activation
INFO
TEMP
xx
Current temperature
VERS
xxx
Software version
TIME
xxxH
Total working hours
AUTO
AT01 - AT08
SP1 … SP10
SP01 - SP10
Auto mode (from 1 to 8) with
strobe frequency adjustment
SLAU
Slave mode
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
 Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
 Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAU).
 Operate the Master unit in Automatic mode (AUTO), Macro Color (COLO), or Musical
(SOUN) to operate the entire system. The entire chain of Slave unit will act as the Master
unit.