User Manual

WARNING: All the settings by remote controller are only temporary. When the projector is

switched off all the settings by the remote controller will be lost. In order to have the same

settings after restart, it needs that they are set by the display

7. - MAINTENANCE

To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from

the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner

or an air compressor and a soft brush or a lens cloth to remove the dust deposited.

The lenses, like any other damaged part, must be replaced with original spare parts.

- In order to have a good efficiency of the battery, it is suggested to charge the battery at least

1 time each month

- the best performances of a Lithium battery will be after 3 times of charge and discharge

- do not short circuit the poles of the battery in order to avoid overheating or burning. In case

of storage of battery, insulate the two poles

- if the battery is damaged, DO NOT REPAIR. It must be changed.

8. - TECHNICAL SPECIFICATIONS

• Power Supply: 100-240 VAC 50/60Hz or with 12,6 VDC battery

• LED: 8x10W RGBW/FC

• Beam Angle: 10° x 40°

• Power: 64W

• Operation Mode: Auto, Sound, Master/slave, DMX512

• Electronic Dimming 0-100%

• DMX: 1 – 4 – 7 Channels

• Dimensions (L x H x D): mm. 565x190x140

• Weight: kg 3,6

190

565

140