User Manual

21
7. In order to disconnect all the SLAVE units at the same time from the MASTER, in the MASTER
unit go under the RELEASE menu. Press and hold the buttons + or – until the writing SUCCES
appears. All the SLAVE units will be disconnected from the MASTER
WARNING: this last operation must be done when the MASTER/SLAVE chain is not
more used, in case the chain is not more used for future. If this operation is not applied
and the MASTER unit is lost, it needs to apply the procedure indicated in the point 2 in
each single bar.
6.3 - DMX MODE
1 channel mode
Channel
Values
Description
1
000 – 255
Color macro
4 channels mode
Channel
Values
Description
1
000 – 255
Red level
2
000 – 255
Green Level
3
000 – 255
Blue level
4
000 - 255
White level
7 channels mode
Channel
Values
Description
1
000 – 255
Master dimmer
2
000 – 255
Strobe from slow to fast
3
000 – 255
Red level
4
000 - 255
Green Level
5
000 - 255
Blue level
6
000 - 255
White level
7
000 - 255
Macros
6.3 – IR REMOTE CONTROLLER
By activating the IR receiver in the relative submenu, it is possible to control the projector with
the remote controller included
With the buttons, after set the projector in MASTER mode with the M/S button, it is possible
to activate:
- AUTO MODE (AUTO button) and the relative speed (+/- buttons)
- SOUND MODE (SOUND button) and the relative speed (+/- buttons)
- Manual adjustment of each color
- Color macro
- Strobe